Floor heating method to lay the floor system requirements To warm the system environment is more complex, the thermal conductivity of the floor, dimensional stability requirements are higher. To ensure better heat conduction and to avoid deformation of the floor, should be selected thickness of not more than 8mm laminate flooring. The ordinary thickness of more than 8mm solid wood flooring, bamboo flooring, solid wood flooring and laminate flooring should not be used to warm the system of the occasion. Pre-laying requirements a Construction must be warm before the heating system to send water detection, water temperature of at least 50 ℃, to warm the system is running normally, and insulation for more than 12 hours. Confirm that there is no leakage before construction. The above tests are not carried out. Do not allow the use of damage to the surface of the construction method, so as not to damage the cooling coil. Cold areas in winter construction, the floor should be stored in the field more than 12 hours in advance to adapt to changes in temperature and reduce floor deformation. Before installation should check the ground is smooth, dry, clean, the windows are complete, the relevant facilities for leakage, check the door and the ground clearance is sufficient. Will be a special mat laying on the ground neat, the interface with adhesive tape sealed.
Project Report Wpc
low maintenance wood plastic flooring sale
wood plastic decking distributor durban south africa
price of plastic composite decking